二、Application Rang And Features of Mud Gas Separator

• May 27, 2022
• A mud gas separator is special equipment for gas gutting drilling fluid primary degassing, it is an ideal mud gas separator. Mud gas separator is divided into ordinary pressure and pressure auto control is according to pressure. ...

What Factors Will Limit This Flow Rate?

 

Mainly, this will come from the relationship between the hydrostatic head of fluid located at the mud outlet and the backpressure at the outlet to the vent line. At times, there’s a risk the backpressure at the gas flow will be greater than (or even equal to) the mud outlet’s available hydrostatic head. When this occurs, the shaker head tank may be in danger.

 

At all times, minimizing risk should be a key objective and this can be aided with a large ID and straight vent line. Elsewhere, the mud outlet should be set up with a hydrostatic head of at least ten feet.

 

 

Furthermore, it’s important to keep an eye on the pressure gauge used for backpressure. If registered readings are showing pressure close to the discharge line’s hydrostatic head, this is a warning of a so-called ‘blow-through’. When large amounts of condensate or oil are displaced to the surface, the maximum hydrostatic head may not be equal to that of mud.

 

When the separator is in danger of breaching the safe operating limit, check that the well isn’t over-pressured and close in the choke. Alternatively, switch the flow to the burn pit or overboard line.

 

Application Rang of Mud Gas Separator

 

Mud gas separator is matching used with throttle manifold, it can break away the free gas in drilling fluid. It can be used to dispose underbalance drilling and hydrothion drilling fluid.

 

Features and Benefits of Mud Gas Separator

 

Separates free gas accumulations, including toxic gases such as hydrogen sulfide, from the drilling mud system.

 

Reduces Hazardous Gas Threat – The separated gas is carried by vent lines to a remote location and flared.

 

Fail-safe gas delivery can be controlled by a back-pressure manifold valve in the flare line.

 

Versatile Configuration – Designed such that it can be raised or lowered for flow line adjustments to minimize piping. 

 

KOSUN solid control is according research of at home and abroad, our engineer combine with technology develop a new type mud gas separator, it not only has all features of common mud gas separator but also has long service life. It can meet the requirements of customers’ and the mud gas separator is popular in Middle –east, America, Asian, and other districts.