Equipment for Drilling Waste Management

Equipment for Drilling Waste Management

Vertical Cutting Dryer is one of the popular products for drilling waste management.KOSUN is the a manufacturer with API Certified who provide vertical cutting dryer for drilling waste management.KOSUN can also supply dryer shaker,and decanter cetrifuge for drilling waste management.

Vertical Cutting Dryer for drilling waste management

Vertical cutting dryer is also called vertical centrifuge, it is a very important part for drilling waste management on treating oil-based mud.vertical cutting dryer could be regarded as a vertical centrifuge, the discharged cuttings transferred by the auger get into the screw conveyor. Drilling fluid vertical cutting dryer from the opening on the top, under the function of centrifugal force produced by rotation of the screen module. Liquid flow out from the opening at the flank side while the solids discharged out from the outlet at the bottom of the cutting dryer. The discharged solids water content is around 30%, that means there is no flowing water, so it could be transported easily.

Vertical Cutting Dryer

Vertical cutting dryer uses centrifugal force to dry drilled solids in oil or synthetic base fluids. A stainless steel screen bowl traps “wet” solids and accelerates them up to 900RPM with G force up to 420. Liquid is forced through the screen bowl openings, while “dry” solids are extracted by the angled flights attached to the cone, which rotate slightly slower than the bowl. Tungsten carbide protects the flights from abrasive solids and ensures long operational life. This aids in maintaining a constant gap between the scroll and screen bowl, which is crucial for vertical cutting dryer proper operation. KOSUN Vertical Cutting Dryer has been done strict balance testing for all major rotary components to minimize vibration and noise. The cutting dryer is the ideal products for oil-based drilling waste management.

Dryer Shaker for drilling waste management

Hi-G Dryer shaker is also an important equipment for drilling waste management. KOSUN dryer shaker recovers drill fluids cuttings from water-based and oil-based drilling fluids, can make the proportion of the liquid phase in the drilling to be lower than 10%, can significantly reduce the cost of the waste discharge, and is particularly effective in recovering the oil-based mud cuttings.

Hi-G Dryer shaker

Decanter Cetrifuge for drilling waste management

Decanter centrifuge as well as the high speed for separation fine solids which can meet your applications for drilling waste management.You can use the centrifuge for polishing the drilling fluids recovered from the Vertical Cutting Dryer and send it back to active mud tanks.