The working process of mud treatment without falling to the ground

• Aug 11, 2021
• The non-floating mud treatment workflow is to separate solids and liquids through solid control equipment at all levels, and finally to separate the drilling waste in the mud, and then recycle the clean mud....

The working process of drilling mud non-ground treatment is described as follows:

The mud from the drilling rig enters the vibrating screen and cleaner through the overhead pipe manifold for primary treatment, and the drill cuttings discharged after the treatment are transported to the vertical spin dryer through the screw conveyor for treatment. The solids processed by the vertical spin dryer are discharged through the waste residue, and the recovered drilling mud enters the drilling fluid mud tank. The centrifuge liquid supply pump or screw pump extracts the recovered mud containing fine solid particles and supplies it to the centrifuge for processing. The solid part passes through The solid slag discharge port is removed, and the clean mud after treatment is returned to the mud system.
 

 
 

KOSUN focuses on the R&D and innovation of solids control equipment and new drilling mud non-landing equipment, and has gained a good reputation in the industry. KOSUN is the first domestic manufacturer to develop complete sets of equipment for drilling mud without landing. Its products have been sold to many countries and regions and have been highly praised by customers. KOSUN complete sets of drilling mud non-landing equipment can be leased and sold, which can meet the non-landing treatment of oil-based mud and water-based mud.