KOSUN 500 GPM mud Solids Control Unit for CBM drilling

For CBM Drilling, normally it needs to be 500 GPM mud cleaning capacity. And for CBM drilling, normally, the solids control unit needs to control and separate the sands and silts in drilling mud, which is bigger than 20 microns.

For 500GPM capacity Solids Control Unit for CBM Drilling Working Flow:

The mud will firstly goes threw the bottom deck shale shaker, with shale shaker screens to remove particles larger than 230 Microns. And a centrifugal pump suck the fluids from tank first compartment to feed the 4 inch desilters to remove solids larger than 20 microns.And solids discharge from the desilter nipple will drop down the the upper shaker deck for drying before discharge. If the drillers still want to reduce the density of the drilling mud, the Mini decanter centrifuge can be turned on to remove solids bigger than 5 microns. The mixing hopper and mixing pump is available for preparing and mixing chemicals in the drilling mud.

Solids control unit shale shaker


Solids control unit centrifugal pump

Solids control unit decanter centrifuge

About CBM Drilling

CBM is an unconventional source of natural gas produced from gas residing in coal seams. CBM wells are typically shallow (less than 1000 meters total depth) and have a single string of surface casing cemented in place. So the 500 GPM mud solids control unit is very popular for the CBM Drilling.

CBM (Coal Bed Methane) drilling is performed with rotary and core drilling equipment. The Two type of drilling rigs have different functions. Rotary rigs are used to drill and set casing for CBM production wells, and, along with core drills, are used to drill long directionally-drilled holes into coal seams from which coal-bed methane gas is extracted

About KOSUN

KOSUN is a leader in domestic solids control industry and expert in waste treatment. Since its establishement in 1992, it has been working on continuous development of solids control and waste treatment technologies. Its sustaining innovative ability have given birth to drilling shale shaker in 1992, drilling mud desander and drilling mud desilter in 1993, centrifugal pump in 1994, vacuum degasser in 1997, drilling centrifuge in 1998, low-temperature solids control system in 1998, which was put into direct application in Kazakhstan, Black Rhino portfolio in 2013, rolled out into U.S. market.

KOSUN has spanned its sales and after-sales services network across the globe, with factories, marketing company and service company in Kazakhstan; stable partnerships and waste management projects in Algeria and Egypt; a subsidiary in North America in 2013 for better product roll-out and services in the market.

KOSUN mainly targets its products and services to

1.Drilling fluids services companies;

2.Drilling companies: oil & gas drilling companies, coalbed gas drilling companies, horizontal directional crossing companies, themal drilling companies, water wells drilling companies, mineral exploration companies, piling and shield construction units;

3.Rig companies: oil & gas drilling rig companies, coalbed gas and horizontal directional drilling rig manufacture companies or sets sales companies;

4.Oil companies;

5.Oil & gas services companies;

6.Mud tank manufacturers;

7.Trading companies, other concerned equipment manufacturer in the industry, etc.